Miele W 2662 WPS Operating Instructions Manual page 39

q
DRAIN
FAULT
p
INLET
FAULT
o
WPS
ACTIVATED
ä
DRUM LIGHTING
FAULT
,
TECHNICAL
FAULT
call Service Dept
The following will flash
in the display:
ANTI-CREASE
alternately with
CHECK DETERGENT
A To switch off the fault message: Switch the washing machine off with I-On/0-Off
button.
– The water outlet is
blocked or restricted.
– The drain hose has
been fixed too high.
– The water inlet is
blocked or restricted.
The water protection
system has reacted.
The drum lighting is not
locked in position.
There is a fault.
Excessive foam has built
up during washing.
– Clean the drain filter and
the drain pump.
– The maximum drain height
is 1 m.
Check whether
– the stopcock is opened
wide enough.
– the inlet hose is kinked.
Call the Service Department.
Check that the drum lighting
is sitting correctly.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
Use less detergent next time
and follow the
manufacturer's instructions
on dosage given on the
packaging.
A
39