Miele W 2662 WPS Operating Instructions Manual page 12

^ Turn the programme selector to the
Stop position.
^ Open the drum door.
^ Switch the washing machine off.
^ Switch the machine back on again.
^ Turn the programme selector to the
Cottons 95°C position.
^ Press and hold the Load/Detergent
button until the following appears in
the display:
Zero setting
i
OK
The accuracy of the calibration
device will improve over the first few
programmes. At first it will drop a
little. For this reason, please re-
calibrate the sensor to zero after
each of the first few wash cycles.
^ Turn the programme selector to Stop
and switch off the washing machine.
12