Table of Contents
Advertisement
Quick Links
VEHICLE SECURITY SYSTEM
Optional Remote Start Module and 2-way Transmitter Instructions Included
STANDARD FEATURES
Some of the system's standard features include:
• 4-button remote transmitter
• LED Status indicator
• Valet/Override switch
• Extended Range Receiver
• 125dB Multi-tone siren
• Dual stage impact detector
• Remote panic
• Remote Valet mode
• Remote chirp delete
• Remote sensor bypass
• Passive or active arming
• Flashing parking lights
• Auto Rearming
OPTIONAL FEATURES
This system has many optional features that
may require additional parts and/or labor.
Please contact your dealer for more details.
• Remote keyless entry (door lock/unlock)
• Illuminated entry
• LCD 2-way Remote
• Hood & trunk protection
• Trunk/hatch release
• Window roll-up
• Additional sensors
• Remote Start (optional plug-in module)
• Stop & Go Feature
• Auto Cold Start
Note: Some features may not be appropriate
for certain vehicles.
SYSTEM MANUAL
REMOTE TRANSMITTER BUTTONS
Button 1
Button 3
Transmitter Icons
NOTE: Transmitter cosmetics may differ
between models and between standard 1-way
and LCD 2-way transmitters, but button
functions remain the same as described below.
Each transmitter button has two operating
modes: standard and level shifted. Pressing a
transmitter button for less than one second
activates the standard function associated with
that button (such as arm or disarm). Pressing a
button for more than one second changes the
color of the standard transmitter's LED to
green and activates the level shift feature.
While the LED is green (level shifted), pressing
any transmitter button accesses another level
of commands providing expanded operation.
1
Button 2
Button 4
Advertisement
Table of Contents
Related Manuals for Black Widow Security BW X-Z Series
Summary of Contents for Black Widow Security BW X-Z Series
- Page 1 VEHICLE SECURITY SYSTEM Optional Remote Start Module and 2-way Transmitter Instructions Included SYSTEM MANUAL STANDARD FEATURES REMOTE TRANSMITTER BUTTONS Some of the system’s standard features include: Button 1 Button 2 • 4-button remote transmitter • LED Status indicator • Valet/Override switch •...
-
Page 2: Arming Operation
ARMING OPERATION PASSIVE ARMING OPERATION To arm the system press transmitter button 1: The passive arming feature allows the system to arm automatically without user intervention. • The siren will chirp once. This feature can be toggled on/off using the •... - Page 3 TAMPER ALERT IGNITION CONTROLLED LOCKS If the alarm was triggered while away from the The ignition controlled locks feature allows the vehicle, the siren will chirp 3 times and the parking doors to automatically lock when the brake lights will flash 4 times on disarming for tamper pedal is pressed (after turning on the ignition indication.
-
Page 4: Valet Mode
VALET MODE before activating the trunk release. When the system is placed into the Valet Mode NOTE: This feature must be programmed the security and remote start features will be during installation and only functions if auxiliary disabled. However, the optional keyless entry is programmed for momentary output. - Page 5 To activate anti-carjack protection: 4. Turn ignition off, then back on. 5. Press the override switch the number of 1. Make sure the ignition is on and all doors are closed. times equal to the second digit of the PIN. 2.
-
Page 6: Surf Mode
SURF MODE the pre-programmed time. If the engine fails to start on the first attempt, it will The Surf Mode allows the system to be armed attempt to start 3 more times. If the or disarmed using just the key and override vehicle fails to start after a total of 4 switch. -
Page 7: Safety Features
To resume driver control: MANUAL TRANSMISSION MODE On manual transmission vehicles, the remote 1. Unlock the doors by pressing transmitter button 2. start feature will not operate unless the proper vehicle exit sequence is performed. This 2. Turn on the ignition. operating mode protects against in-gear •... - Page 8 LED AND PARKING LIGHT INDICATIONS STATUS INDICATOR (LED) FUNCTIONS PARKING LIGHT FUNCTIONS On Solid = Valet Mode On Solid = Vehicle Remote Starting Slow Flash = System Armed Flash I x = System armed Rapid Flash = Passive Arming Flash 2x = System disarmed Rapid Flash w/ Ignition on = Open Zone Warning Flash 4x = Defective zone warning (after arming) Rapid Flash while Ignition on and Anti-Carjack...
-
Page 9: Remote Transmitter Layout
OPTIONAL 2-WAY TRANSMITTER WITH LCD DISPLAY OPERATING INSTRUCTIONS REMOTE TRANSMITTER LAYOUT the 2-way transmitter also provides audible and vibration alert in case the display is out of view. Button 3 Button 4 Button 5 And, for night-time use the LCD is equipped with a backlight feature which is activated by pressing button 5. - Page 10 OPTIONAL 2-WAY TRANSMITTER INDICATIONS The optional 2-way LCD transmitter displays more than 20 different screens to provide real-time indications for feature activation and system status. the different display indications are shown below for reference. Silent Arm Disarm Door Open Hood Open Trunk Open Warn-Away Trigger Shock Sensor Trigger...
- Page 11 Ignition Key On Brake Pedal Cold Start Passive / Last Door Arm Immobilize Low Transmitter Battery Range Indicator Button Lock Anti-Carjack Mode...
-
Page 12: Before You Begin
VEHICLE SECURITY SYSTEM Optional Remote Start Module and 2-way Transmitter Instructions Included INSTALLATION INSTRUCTIONS BEFORE INSTALLING THIS PRODUCT PLEASE READ THE INSTALLATION DIRECTIONS THOROUGHLY!! BEFORE YOU BEGIN Mounting System Modules This system is compatible with electronic Mount the security and optional remote start fuel injected engines only! Not intended for module under the dash where it will be difficult use with carbureted engines. - Page 13 ALARM MODULE WIRING Window Roll-up: Connect to a relay or other 6-Pin Door Lock Harness device to operate window modules or other desired features. Plug-in connector port for door lock harness. See Door Lock Wiring Diagrams • BLACK/RED WIRE - Starter defeat/anti-grind output (-) 500mA.
- Page 14 • GREEN/YELLOW WIRE - Parking Light defeat input. After cutting the vehicle’s starter output (+) 7.5A relay. Used for vehicle’s with wire, connect the BLUE/RED wire to the key independent left and right parking light circuits; side of the ignition wire if normally open operation is desired.
- Page 15 • BLACK/YELLOW WIRE (small) - not used. wire can be used as an optional auxiliary start or stop input when connected to an external • BLACK/YELLOW WIRE (large) - Start output device that supplies a pulsed ground output. (+). Connect to the vehicle’s starter wire. •...
-
Page 16: System Programming
SYSTEM PROGRAMMING Complete Default Reset Entering Programming Follow this procedure to set the Programming To enter System Programming Features to factory default settings. 1. Turn on ignition. 1. Enter Alarm or Remote Start Feature program mode. 2. Within 5 seconds, press valet the proper number of times for the desired mode: 2. - Page 17 unlocks when ignition is turned off.The system on for 10 /30 seconds or each time the will not lock if any door is open when the transmitter button is pressed. If the button is ignition is turned on. Brake/On mode- the pressed again during the timed period, the doors will lock after closing all doors and output will turn off.
- Page 18 Remote Start Programmable Features Defroster, the wire turns on 10 seconds after remote starting and remains on for 5 minutes. 1. Engine Run Time. Selects between 10, 15, 20, and 30 minute run cycles. 8. Diesel Wait-to-Start Mode. Selects between the 10 second countdown timer for diesel 2.
- Page 19 REMOTE START NOTES Gas and Diesel Modes Smart Start and Tach Start The default setting for the engine mode is Gas In order for the system to properly start and Engine. For diesel vehicles, the engine type for run the vehicle, the unit must be able to dip switch #5 must be set to Diesel Engine.
-
Page 20: Adding Transmitters
Passive Transponder Systems: Passive transponder systems have become the most popular anti-theft system among vehicle manufacturers (Ford, Honda, BMW, Toyota, Nissan and others). This system requires use of a tiny passive transmitter housed in the base of the key. This device activates when placed close to the vehicle’s ignition switch. - Page 21 STARTER DEFEAT RELAY WIRING DIAGRAMS The Starter Defeat/Anti-Grind relay socket can be wired in either normally closed or normally open configuration. In either configuration, the Starter Defeat relay also provides Anti-Grind protection during remote start control, to prevent accidentally grinding the starter if attempting to start the vehicle using the key.
- Page 22 RELAY WIRING DIAGRAMS HORN HONK DIAGRAMS DOME LIGHT DIAGRAMS DEFROSTER DIAGRAMS TRUNK RELEASE DIAGRAM OPTIONAL HEADLIGHT ACTIVATION Program the Auxiliary output for timed operation and the headlights will turn on with Auxiliary for the preset timer duration then automatically turn off. Program the Auxiliary output for latched operation and the headlights will turn on with Auxiliary and remain on until the Auxiliary function is pressed again.
-
Page 23: Door Lock Wiring Diagrams
DOOR LOCK WIRING DIAGRAMS NEGATIVE PULSE LOCK SYSTEM POSITIVE PULSE LOCK SYSTEM ADDING ACTUATORS VACUUM LOCK SYSTEM REVERSE POLARITY LOCK SYSTEM NOTE: The Black/Red door lock polarity input wire connects to the short Red or short Black wire in the 14- pin main harness depending on door lock circuit type. - Page 24 ALARM MODULE WIRING DIAGRAM Blue Lock relay common 30 [10A fuse] Black/Red Lock relay normally open 87 Blue/Black Lock relay normally closed 87a Green Unlock relay common 30 [10A fuse] Black/Red Unlock relay normally open 87 Green/Black Unlock relay normally closed 87a +12V Battery input (+) Black Ground (-)