Black Widow Security BW X-Z Series System Manual page 18

Remote Start Programmable Features
1. Engine Run Time. Selects between 10, 15,
20, and 30 minute run cycles.
2. Turbo Timer Feature. For vehicles equipped
with a turbocharger, this feature allows the
engine to continue running for up to 6 minutes
after the ignition is turned off, so the turbo has
time to cool down.
3. Cold Temperature Starting. Allows the
vehicle to automatically start and run every 1,
2, 4, or 12 hours for severe cold weather.
4. Parking Light Mode. Selects the operation
of the parking light output while the vehicle is
remote started. Choose between flashing
output, constant output, and off.
5. Lock with Remote Start. Automatically
locks the doors after remote starting.
6. Lock with Remote Shutdown.
matically locks the doors 5 seconds after the
remote start is shut down.
7. Yellow/Black Wire Programming. Selects
between Factory Disarm, 3rd ignition (relay
required), and Pulsed or Latched Defroster
output. When set for Factory Disarm output,
the Yellow/Black wire pulses on disarm and
remote start to turn off a factory alarm. When
set for 3rd Ignition output, the wire turns on
with Ignition 1 and 2 relays. When set to Pulsed
Defroster output, the wire pulses 10 seconds
after remote starting. When set to Latched
REMOTE START PROGRAMMABLE FEATURES
Step Function
1. Engine Run Time
2. Turbo Timer Mode
3. Cold Start Timer
4. Parking Light w/Start
5. Lock on Remote Start
6. Lock on End Start Cycle
7. Yellow/Black Wire Program Factory Disarm
8. Diesel Wait-to-Start Mode
Defroster, the wire turns on 10 seconds after
remote starting and remains on for 5 minutes.
8. Diesel Wait-to-Start Mode. Selects between
the 10 second countdown timer for diesel
vehicles without a glow plug wire, or between
glow plug wire monitoring for vehicles with a
wait-to-start indicator light.
REMOTE START DIP SWITCHES
1. Tachless Mode Crank Time. OFF= standard
(0.8 seconds) crank time. ON= extended (1.8
seconds) crank time for the tachless operation
mode. Not used when RPM monitoring with
tach wire is connected.
2. Engine Start Sense. OFF= Tach Start for
actual RPM monitored starting. ON= Smart
Start for tachless operation.
3. Ignition 2 Relay Program. OFF= Ignition 2
Auto-
operation. ON= Accessory 2 operation. In
accessory 2 mode the output will not turn on
until after engine cranking.
4. Transmission Mode. OFF= automatic
transmission. ON= manual transmission.
5. Gas/Diesel Mode. Sets the crank delay after
ignition turns on. OFF= gasoline engine. ON=
diesel engine. See Orange/Violet (Glow Plug) wire
description and Remote Start Programmable
Features step#8
6. RPM Signal LED. ON= Turns on the RPM
LED for tach wire locating/testing.
Button 1 Button 2
10 minutes 15 minutes
Off I minute
1 hour 2 hours
Flashing Continuous
No lock Lock
No Lock Lock
Ignition 3 output Defroster pulse
10 second timer Glow Plug Input
18
Button 3 Button 4
20 minutes 30 minutes
3 minutes 6 minutes
4 hours 12 hours
Off
Defroster latch