Download Print this page

Remote Programmable Features - Black Widow Security BW IM 1 Installation Manual

Passive vehicle immobilizer system

Advertisement

R
emote Programmable Features:
Step
Function
1.
Ignition Lock
2.
Passive Unlock
3.
Normal/Silent Arming
4.
Door Unlock Pulse
5.
Door Lock Pulse Length
6.
Wire #9 Output on Disarm
7.
Anti-Carjack Feature

Remote Programmable Features

To change programmable feature:
1. Turn off the Auto Transmit mode.*
2. Turn on the ignition.
3. Wait 2 seconds.
4. Within 10 seconds press valet switch 5 times.
• The LED flashes 3 times indicating the system
is now in program mode.
5. Press valet switch the number of times that
equal to the feature you wish to change.
(Example: to turn feature #3 off press the valet
switch 3 times).
• The LED will flash each time the switch is
pushed.
6. Press the transmitter button to reverse the
current setting.
7. Turn off the ignition.
If the Auto Transmit mode is left on, the
*
programmable features may be reset to the
default settings or undesired operation may result.
NOTE: You must re-enter program mode for each
feature you wish to change.
Programmable Features
Program #1: Ignition Lock
On = Ignition auto lock
Off = No ignition auto lock
Program #2: Passive Unlock
On = Passive w/unlock
Off = Passive no unlock
© DLC, Inc.
On (Default)
On
On
Silent
Single
.75 Seconds
Dome Light Output
Enabled
Program #3: Normal/Silent Arming
On = Silent operation
Off = Normal operation
Program #4: Door Unlock Pulse
On = Single
Off = Double
Program #5: Door Lock Pulse Length
On = 0.7 second door lock/unlock pulse
Off = 3 second door lock/unlock pulse
Program #6: Wire # 9 Output on Disarm
On = Dome Light Output for 30 seconds
Off = Factory Alarm DisarmOutput
Program #7: Anti-Carjack Feature
On = Anti-Carjacking Enabled
Off = Anti-Carjacking Disabled
Default Reset
To reset all programmable features to the factory
default settings:
1. Turn on the ignition.
2. Wait 2 seconds.
3. Within 10 seconds press valet switch 5 times.
• The LED flashes four times indicating the sys-
tem is now in program mode.
4. Press the transmitter button once. The LED
will flash 4 times and all programmable features
will be reset to the On position.
4
Off
Off
Off
Normal
Double
3 Seconds
Factory Alarm Disarm
Disabled
65-IMM Rev. 1, 07/02

Advertisement

loading

This manual is also suitable for:

1