General; Installation; Unpacking; Location - Berkel FMS30 Owner's/Operator's Manual

Installation, Operation, and Care of
BERKEL FMS30 & FMS40 Quart MIXER
SAVE THESE INSTRUCTIONS

GENERAL

The 30 quart mixer has an AC Induction electric motor and motor control. A 30 quart bowl, B-Flat beater,
spiral dough hook, D wire whip and ingredient chute are shipped as standard equipment. A 0 - 15 minute
timer and four plastic foot pads are standard. A #12 attachment hub is standard. A variety of attachments
are available. A 20 quart bowl and it's associated accessories are optional.
The 40 quart mixer has an AC induction electric motor and motor control. A 40 quart bowl, bowl guard,
B-fl at beater, spiral dough hook, D wire whip and ingredient chute are shipped as standard equipment. A
0 - 15 minute timer and four plastic foot pads are standard. A #12 attachment hub is standard. A variety
of attachments are available. A 20 quart bowl and its associated accessories are optional.

INSTALLATION

UNPACKING

Immediately after unpacking the mixer, check for possible shipping damage. If the mixer is found to be
damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, test the electrical service to assure that it agrees with the specifi cations on the machine
data plate.

LOCATION

Remove hex head shipping bolts with an open end wrench (or crescent wrench), that attaches the four
legs to the base-frame of the carton.
Place the mixer on a suitable sturdy level surface. There should be adequate space around the mixer for
the user to operate the controls and install and remove bowls.
FMS30 & FMS40 Owner/Operator Manual
– 3 –