Installation, Operation, and Care of BERKEL FMS10 & 20 Quart MIXER SAVE THESE INSTRUCTIONS GENERAL The 10 quart mixer has a DC electric motor and motor control. A 10 quart bowl, bowl guard, B-Flat beater, spiral dough hook, D wire whip and ingredient chute are shipped as standard equipment. A 0-15 minute timer and four plastic foot pads are standard.
OPERATION Moving beater in bowl. Keep hands, clothing, and utensils out while in operation. Do not use without interlocked guard. Controls Bowl Guard Splash Guard Bowl Guard Wire Cage Agitator Bowl Lift Handle Bowl Support Fig. 1 Attachment Hub Thumb Screw and Plug Fig.
CONTROLS (FIG. 2) Speed Selector Time Selector Starts Mixer Time Selector Stops Mixer Fig. 2 Push-button Start and Stop buttons control power to the mixer. The Bowl Guard must be in place and closed or the mixer will not operate. If the Bowl Support is not all the way up, the mixer will not operate.
MIXING This section explains operation of the mixer and how to install bowls and agitators. BOWL New mixer bowls and agitators (beaters, whips, spiral dough hook, ingredient chute and splash cover) should be thoroughly washed with hot water and a mild soap solution, rinsed with either a mild soda or vinegar solution, and thoroughly rinsed with clear water before being put into service.
BOWL GUARD / WIRE CAGE Wire cage must be in position and closed in order to mix. If wire cage is opened during the mixing, mixer will stop ATTACHMENTS (OPTIONAL FEATURE FOR 20 QUART MIXER) To install an attachment, loosen the thumb screw on the attachment hub (Fig.1A, page 4) and remove the plug.
MIXING BOWL CAPACITY CHART Capacity of Bowl (Qts. Liquid) 10-Quart 20-Quart Model FMS10 FMS20 Agitators Suitable for Motor (HP) Operation Overall Space Required (Bench Space) 13¾" W X 17 ½" 17 ¾"W X 23 D X 25 ¾"H ¼"D X 31 ½"H Kitchen Materials Capacity Chart (Finished Materials) Egg Whites (pt.) 1 pt.
AGITATORS AND ACCESSORIES S Spiral Dough Hook Ingredient Chute Splash Cover B Flat Beater D Wire Whip MAINTENANCE Unplug machine power cord before beginning any maintenance procedure. MOTOR The motor has sealed ball bearings which require no lubrication maintenance. BOWL LIFT SLIDEWAYS The bowl lift slideways (Fig.
To obtain service and parts information concerning the FMS10 & FMS20, you have two options: You can contact the local Designated Berkel Service Location (DBSL). To locate the nearest DBSL, please visit www.berkel.com. Additional information may be obtained by dialing (800- 348-0251).
Berkel's obligation and liability under this warranty is expressly limited to repairing or replacing equipment that proves to be defective in material or workmanship within the applicable warranty period. Berkel or a Designated Berkel Service Location will perform all repairs pursuant to this warranty. Berkel expressly excludes responsibility for incidental or consequential damages to buyer or any third party, including, without limitation, damages arising from personal injuries, lost profi...