Advertisement
T
The mixer has an attachment hub located on the front. A cover must be removed before the attachment
can be set into place. Once in place, a locking knob secures the attachment to the mixer.
1. VSPH (4975-00103)
The VSPH (V
EGETABLE
cutting, grating and shredding of an abundant variety of food products. The high polished all
aluminum housing features (5) available stainless steel plates for grating or shredding and an
optional knife for cutting. Very helpful for volume cutting and grating for such products as
lettuce, tomatoes, cheese, cabbage, carrots, cucumbers, etc. The recommended speed would be
low.
2. FCMC (4975-00452)
The FCMC (F
OOD
processes. It is very durable and easy to clean. The recommended speed would be low or
medium, not high.
C
The Models PM60 and PM80 mixers have been designed for a minimal amount of owner mainte-
nance.
After use, thoroughly clean the bowl and attachments with hot soapy water. The mixer housing can
be wiped down with a damp cloth. Rinse, sanitize and allow to air dry.
When sanitizing be sure to use only an approved sanitizing solution. This will help kill germs and
bacteria.
If accessories have been used (example: VSPH) apply some Berkel USDA approved food equipment
oil to the auxiliary drive socket and accessory shafts for lubrication.
Use only USDA-authorized Berkel oil or grease to prevent possible food contamination.
For your convenience, this oil is supplied in the following quantities: 2 oz. (part # 4675-00182),
16 oz. (part # 4675-00183), or one gallon (part # 4675-00184) containers. The grease is
supplied in a pack of three 3-ounce tubes (part # 4675-00185).
S
P
HREDDER
LATE
C
M
C
UTTER
IXER
HOPPER
H
) vegetable cutter attachment provides fast
OLDER
) is a grinder attachment used for small grinding
WARNING
PM60 & PM80 O
/O
M
WNER
PERATOR
ANUAL
• 11
Advertisement
