Quick Reference Guide - Beltronics Vector V8 Owner's Manual

Quick Reference Guide

To begin using your V8,
just follow these simple steps:
1
Plug the small end of the power cord
into the side jack of the detector, and
plug the large end of the power cord
into your car's lighter socket.
2 Mount your V8 on the windshield
using the supplied windshield mount.
3
Press the PWR button, located top left,
to turn the V8 on.
4
Press and hold the Volume/Mute
button to adjust the volume.
Please read the manual to fully understand
your V8's operation and features.
QuickMount Slot
Insert the V8's adjustable Windshield
mount into this slot. Page 7
QuickMount Button
Press the button, and slide the Windshield
mount into one of its four locking
positions. Page 7
City Button
Switches between AutoScan, City and
Highway settings. In general, we
recommend AutoScan. Page 9
Power
Press the PWR button to turn the V8 on
or off.
AutoMute
Your V8's patented AutoMute
automatically reduces the volume level of
the audio alert after a brief period. If you
prefer, you can turn AutoMute off. Page 8
Programming
Your V8 is ready to go, just plug it in and
turn it on. But you can also easily change 6
features for your preferences. Page 12-14
4
Radar Antenna and Laser Lens
The rear panel of your V8 should have
a clear view of the road ahead. For best
performance, do not mount the V8
directly behind windshield wipers
or tinted areas. Page 6
Alphanumeric Matrix Display
Your V8's display will show Highway,
AutoScan, or City as its power-on
indication. If you prefer, you can choose
other power-on indications. Page 12-14
During an alert, the display will
indicate radar band, and a precise bar graph
of signal strength. Page 10
NOTE: In the Dark Mode the display
will not light during an alert. Page 9