Quick Reference Guide - Beltronics Ultimate Pro 300 Owner's Manual

Quick Reference Guide

To begin using your Pro300,
just follow these simple steps
1
Plug the small end of the power cord
into the side jack of the detector,and
plug the large end of the power cord
into your car's lighter socket.
2
Mount your Pro300 on the windshield
using the supplied windshield mount.
3
Press the PWR button,located top left,
to turn Pro300 on.
4
Press and hold the Volume/Mute
button to adjust the volume.
Please read the manual to fully understand
Pro300's operation and features.
QuickMount Slot
Insert Pro300's adjustable Windshield
mount into this slot. Page 7
QuickMount Button
Press the button,and slide the Windshield
mount into one of its four locking positions.
Page 7
City Button
Switches between AutoScan,City and
Highway,settings.In general,we
recommend AutoScan. Page 8
Power Button
Press the PWR button to turn the Pro300
on or off.Page 8
AutoMute
Pro300's patented AutoMute automatically
reduces the volume level of the audio alert
after a brief period. Page 8. If you prefer,
you can turn AutoMute off. Page 8
Programming
Pro300 is ready to go,just plug it in and
turn it on.But you can also easily change 8
features for your preferences. Page 12-16
4
Radar Antenna and Laser Lens
The rear panel of your Pro300 should have
a clear view of the road ahead.For best
performance,do not mount the Pro300
directly behind windshield wipers
or tinted areas. Page 6
Alphanumeric Matrix Display
Pro300's display will show Highway,
AutoScan,or City as its power-on indication.
If you prefer,you can choose other power-
on indications. Page 12-14
During an alert,the display will
indicate radar band,and a precise bar graph
of signal strength. Page 10
NOTE:In the Dark Mode the display
will not light during an alert. Page 9
The display can also show Safety Radar
text messages. Page 22-23