Service; Troubleshooting; Explanation Of Displays - Beltronics Vector V8 Owner's Manual

Troubleshooting

Problem Solution
The V8 beeps briefly at the same • An X or K-band motion sensor or intrusion alarm is located
location every day,but no radar within range of your route.With time,you will learn
source is in sight. predictable patterns of these signals.
The V8 does not seem sensitive to • Make sure that windshield wipers do not block your V8's
radar or laser. radar antenna and that the laser lens is not behind tinted
areas.
• Determine if your vehicle has an Instaclear ® ,ElectriClear ®
or solar reflective windshield which may deflect radar or laser
signals.
•Your V8 may be in City Mode.
The V8 did not alert when a police • VASCAR (Visual Average Speed Computer and Recorder) a
car was in view. stopwatch method of speed detection,may be in use.
• Officer may not have radar or laser unit turned on.
The V8 did not provide a Safety • Safety transmitters may not be commonly used in your area.
signal while within range of an
emergency vehicle.
The V8's display is not working. • Press the BRT button to deactivate Dark Mode.
The V8's audible alerts are less loud •The V8 is in AutoMute Mode.See page 8 for details.
after the first few alerts.
The V8 bounces or sags on •The V8 is not making contact with the windshield to
windshield. provide stability.While holding down the V8's QuickMount
button,slide the V8 toward the windshield so that the back
top edge makes firm contact.
The V8's power-on sequence • A loose power connection or dirty lighter socket can cause
reoccurs while you are driving. the V8 to be briefly disconnected.
22
Problem Solution
Your 14-year old son has changed •You can return all of the programming options to the
all 6 of the Programming options. factory defaults by holding down the CITY and BRT buttons
while you turn the V8 on.
The V8 will not turn on. • Check that the power is ON.
• Check that vehicle ignition is ON.
• Check that vehicle lighter socket is functional.
•Try the
The V8 feels very warm. • It is normal for the V8 to feel warm.

Explanation of Displays

AD
Sensitivity control is in AutoScan mode,display is in Dark mode (page 9)
HD
Sensitivity control is in Highway mode,display is in Dark mode (page 9)
CD
Sensitivity control is in City mode,display is in Dark mode (page 9)
No display The V8 is in the Dark mode (page 9)
PilotHWY
One of the many programming messages (pages 11-14)
WorkZone
One of the many Safety Radar messages (pages 20-21)
Caution
The V8 has detected a Safety Radar Signal,but the signal isn't yet strong
enough to decode the specific safety message (page 20-21)
Self Cal
The V8 is running a self-calibration test

Service

The V8 has failed the calibration test.Contact Beltronics for repair
Required
V8
in another vehicle.
23