Table of Contents
Advertisement
STARTING UP
•
Take off the cover (1) and remove the tank (12) from the
machine; fill the tank with fresh water and reinsert it into
the machine (Fig. A).
•
Immerge the pipes into the tank and place them in the
proper place up on the right, put the cover (1) back on
the tank (12).
•
Check the switches (2-3-4) are off.
•
Plug the power cable (9) into the mains.
•
Push the main switch (2). "La Pavoni" logo turns on to
indicate that the machine is under voltage (Fig. B). The
"Simpaticone (STE)" and "Simpaticissimo (SMO)" models
are equipped with an active cup-heater (16) which begins
working when turning the machine on, and automatically
keeps the cup temperature constant.
•
Turn the hot water/steam knob (13) anti-clockwise, about
one turn (Fig. C).
•
Place a container under the Turbo Cappuccino (14).
•
Push the coffee switch (3), and wait until the water flows
evenly (Fig. D).
•
Move the knob (13) back to its starting position, turning
clockwise. The water will now flow through the boiler
group (11).
•
Turn off the coffee switch (3). Now the machine is ready
for normal operation.
•
Before FIRST USE only, it is recommended to add two
spoonfuls of bicarbonate to the water, in order to clean the
circuit of possible impurities.
Rinse the tank (12) and repeat the STARTING UP procedure,
•
in order to clean off the bicarbonate residues.
IMPORTANT NOTE
•
The procedure set out on this page should be repeated
every time the tank (12) runs out of water, or after the
machine has been out of use for a long period.
•
Never use the machine when the water tank is empty.
1
21
fig. A
12
fig. B
fig. C
fig. D
Advertisement
Table of Contents
