MOTU FastLane Quick Start Manual page 13

Which one should you use? If you are not sure, the
table below can help you decide:
If you use this
MOTU software only
OMS-compatible software only
Both MOTU and OMS-compatible
software, running separately
Both MOTU and OMS-compatible
software, running together
Regardless of what you decide, you'll need to
configure FreeMIDI and/or OMS for your new
FastLane interface. Refer to the section below that
applies to you.
FreeMIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
OMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FreeMIDI and OMS separately . . . . . . . . . . . . . . . . . . . . . 17
OMS, with FreeMIDI using OMS . . . . . . . . . . . . . . . . . . . 18
FREEMIDI
For existing FreeMIDI users
If you're adding a new FastLane interface to a
USB-equipped Mac that already has FreeMIDI
installed, be sure to run the MOTU USB MIDI
software installer as described earlier in this
booklet to update FreeMIDI. Then simply run
FreeMIDI Setup. Your new FastLane interface will
automatically appear in your current FreeMIDI
configuration. If it doesn't, make sure it's turned on
and check cables.
I N S T A L L I N G T H E M O T U U S B S O F T W A R E
Choose this
FreeMIDI only
OMS only
FreeMIDI and OMS
separately
OMS, with FreeMIDI
using OMS
For new FreeMIDI users
If you haven't previously installed and used
FreeMIDI on your Macintosh, follow this simple
procedure:
1
Make sure that FastLane is connected to the
computer.
2
Locate the FreeMIDI Setup program on you
hard drive. During installation, it is placed in the
FreeMIDI Applications folder on the top level of
your hard drive.
3
Double-click the FreeMIDI Setup application
icon to launch the program.
4 If this is the very first time you've run a
FreeMIDI program on this computer, and you
happen to have OMS installed in the computer,
you'll see the dialog below.
5
Since this is the procedure for using FreeMIDI,
click the FreeMIDI button.
13