MOTU FastLane Quick Start Manual page 10

Launching Audio MIDI Setup
1
Make sure your FastLane MIDI interface is
connected and turned on.
2
Launch the Audio MIDI Setup utility.
This can usually be found in /Applications/
Utilities. If not, just search for Audio MIDI Setup.
3
Confirm that the Fastlane-USB is present in
the MIDI Devices tab of Audio MIDI Setup.
If the interface does not appear, or if it is grayed
out, check your USB cable connection, make sure
the THRU button on the front of the
FastLane-USB is NOT pushed in (disengaged) and
click Rescan MIDI.
Figure-6: A MOTU FastLane-USB interface as it appears in the
MIDI tab of Audio MIDI Setup.
10
Creating a MIDI configuration
Once your FastLane MIDI interface appears in
Audio MIDI Setup, you are ready to add devices,
indicate how they are connected, and identify
properties they may have for particular purposes.
This information is shared with all CoreMIDI
compatible applications.
Adding devices in Audio MIDI Setup
To add a device in Audio MIDI Setup:
1
Click Add Device.
Figure-7: Adding a MIDI device.
2
Drag on its input and output arrows to draw
connections to FastLane that match its physical
connection.
I N S T A L L I N G T H E M O T U U S B S O F T W A R E