Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 2652 WPS Operating Instructions Manual

Spinning

Final spin speed

Wash programme
Cottons Universal
Minimum Iron
Delicates
Cottons Hygiene
Woollens
Silks
Quick wash
Automatic
Separate rinse
Outer wear
Denim
Shirts
Starch
Spin
You can reduce the final spin speed.
You cannot select a final spin speed
higher than that shown in the chart
above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in the
Cottons Hygiene and the Cottons
Universal programmes, an additional
rinse is introduced.
20

To omit the final spin (Rinse hold)

^ Select the Rinse hold setting. The
rpm
laundry will not be spun and will
1600
remain suspended in the final rinse
900
water. This reduces creasing if the
600
laundry is not going to be removed
1600
from the drum immediately after the
1200
end of the programme.
400
– To start the final spin:
1600
900
The washing machine will display the
maximum spin speed possible. You
1200
can select a spin speed lower than
800
this. Start the final spin by pressing
900
the Start/Stop button.
600
– To end the programme:
1500
1600
Press the Door button. The water will
drain away. Press the Door button
again, to open the door.
To omit rinse and interim spin and
the final spin
^ Select the Without spin setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional
rinse is introduced if this setting is
selected with the Cottons Hygiene ,
Cottons Universal , Minimum Iron ,
Quick wash and Automatic
programmes.