Table of Contents
Advertisement
Before using for the first time
Running your first programme
Your washing machine is now ready for
the first programme to be run.
15:00
Select programme
^ Press the programme button for
Cottons Universal .
^ Press the Start/Stop button.
^ At the end of the programme switch
the machine off.
The load sensor must then be
calibrated to zero as you would with
bathroom scales.
12
Calibrating the load sensor to zero
^ Switch the washing machine on.
^ Open the drum door.
^ Press the programme button for
Cottons Universal .
^ Press and hold the Load/Detergent
button until the following appears in
the display:
Zero setting
i
OK
^ Switch the washing machine off.
The drum settles a little during the
first few washes and will take 3 or 4
wash cycles to reach its true position.
For this reason, please re-calibrate
the sensor to zero after each of the
first few wash cycles.
The machine is now ready for use.
Hide quick links:
Advertisement
Table of Contents
