What to do, if . . .
With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
The display remains
dark and the indicator
lights for the
programme buttons
are not lit up.
The display shows:
Machine locked. Enter
code
The display is dark.
Possible cause
There is no power to
the machine.
The electronic system
lock has been
activated.
The display has
switched off
automatically to save
energy (Stand-by
mode).
Problem solving guide
Remedy
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
Enter the code for the system
lock and confirm the entry.
Deactivate the system lock if
you do not wish this message
to appear in the display the
next time the machine is
switched on. See "Settings
menu".
Press a button. Stand-by
comes to an end.
37