Soak Time; Short - Miele W 864 Operating Manual

This is accessed for a programme by
pressing the SOAK button on the fa-
cia.
You can programme a soak time of:
- 2 hours (factory setting) or
- 1 hour 30 mins or
- 1 hour or
- 30 mins.
A "Soak time" of 2 hours is set at the
factory. If you wish to change this stan-
dard setting to one of the times listed
above, you must first select program-
ming mode.
A The machine must be switched off
and the drum door closed. The
programme selector must point to
Finish .
B Press the additional option buttons
Short and Water plus at the same
time and hold pressed in and:
C . . . switch the machine on with the
I-ON/0-OFF-button.
D Let go of all these buttons.
The indicator light Main wash flashes in
the sequence display.
To select the "Soak time" programmable
function turn the programme selector to
- Cold.
The Rinse indicator light comes on in
the sequence display. This shows that
a "Soak time" of 2 hours is currently se-
lected (factory setting).
By pressing the START button a various
number of times you can select differ-
ent soak times. To confirm that a differ-
ent soak time has been selected, the
previous indicator light goes out and a
new indicator light comes on.
Each time START is pressed a different
indicator light will come on. The indica-
tor lights correspond to the 4 soak
times available as follows:
2 hours =
1 hour 30 mins = Rinse hold
1 hour =
30 mins =
When you have selected the soak time
you require, SWITCH the machine OFF
with the I-ON/0-OFF button.
The "Soak time" you have selected is
now stored in the machine's memory.
Rinse
Drain\Spin
Anti crease\Finish
35