Programmable functions enable the
user to introduce further features as
required. They remain stored in
memory until they are cancelled by
the user.
The water level for rinsing is automat-
ically raised to the maximum level
where rinse results are particularly
important.
It is effective for the rinses in the follow-
ing programmes:
- COTTONS
- MINIMUM IRON
- QUICK WASH
- MIXED WASH - Poly/Cottons
Before the "Maximum water level" pro-
grammable function can be selected
you must first select programming
mode.
A The machine must be switched off
and the drum door closed. The
programme selector must point to
Finish .
B Press the additional option buttons
Short and Water plus at the same
time and hold pressed in and:
C . . . switch the machine on with the
I-ON/0-OFF-button.
D Let go of all these buttons.
The indicator light Main wash flashes in
the sequence display.
To select the "Maximum water level"
programmable function: turn the
programme selector to -
Poly/Cottons
To activate "Maximum water level"
press the START button once.
The Rinses light comes on in the se-
quence display.
To store the "Maximum water level" pro-
grammable function in the memory
SWITCH the machine OFF with the
I-ON/0-OFF button.
The "Maximum water level" programma-
ble function is now stored in the ma-
chine's memory and is effective in the
programmes described above until
such time as you may wish to deacti-
vate it.
To deactivate the use of a maximum
water level in the rinses repeat the pro-
cedure given above from point A as far
as the *** shown above. Press the
START button and the Rinses indicator
light will go out. The function is now de-
activated. Store in memory by pressing
the I-ON/0-OFF button.
.
31