Connection To The Drainage System; Drain Hose Connection - Miele W 864 Operating Manual

The machine drains via a drain pump
with a delivery head of 1 metre.
The drain hose is 1.5 m long. It must
not be kinked as this restricts drainage.
The swivel elbow at the end of the hose
can be turned in either direction, or can
be detached if required, with a sharp
twist and pull.
Direct into a sink or basin:
Please note the following
– Hook the hose over the edge and se-
cure.
– Make sure that the water can drain
away freely without hindrance. Other-
wise there is a risk of water overflow-
ing or of some of the drained water
being sucked back into the machine.
Connected securely to a plastic drain
pipe with a rubber nipple. There is no
need to use a non-return valve.
Connected securely to a standpipe.
. Connected securely to a floor gully.
If required, the drain hose can be ex-
tended to a length of 5 m. The neces-
sary parts can be purchased from the
Miele Spare Parts Department, or your
Miele dealer.
For a delivery head of more than 1 m
(up to a maximum of 1.8 m) a second
Duo-drain pump is available with the
corresponding conversion kit from the
Miele Spare Parts Department or your
Miele dealer.
57