Soak Time - Miele W 829 Operating Instructions Manual

Programmable functions

Soak time

This is accessed for a programme by
pressing the SOAK button on the
facia.
You can programme a soak time of:
- 2 hours (factory setting) or
- 1 hour 30 mins or
- 1 hour or
- 30 mins.
A "Soak time" of 2 hours is set at the
factory. If you wish to change this
standard setting to one of the times
listed above, you must first select pro-
gramming mode.
Selecting programming mode
1
The machine must be switched off
and the drum door closed. The pro-
gramme selector must point to "Fin-
ish".
2
Press the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
3
. . . switch the machine on with the
"I-ON/0-OFF"-button.
4
Let go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
34
Selecting the programmable function
To select the "Soak time" programm-
able function turn the programme selec-
tor to – WOOLLENS Cold.
The "Rinse" indicator light comes on in
the sequence display. This shows that
a "Soak time" of 2 hours is currently se-
lected (factory setting).
Selecting a different "Soak time"
By pressing the "START" button a
various number of times you can select
different soak times. To confirm that a
different soak time has been selected,
the previous indicator light goes out
and a new indicator light comes on.
Each time "START" is pressed a differ-
ent indicator light will come on. The indi-
cator lights correspond to the 4 soak
times available as follows:
2 hours =
1 hour 30 mins = "Rinse hold"
1 hour =
30 mins =
Storing in memory
When you have selected the soak time
you require, SWITCH the machine OFF
with the "I-On/0-OFF" button.
The "Soak time" you have selected is
now stored in the machine's memory.
"Rinse"
"Drain \ Spin"
"Anti crease \ Finish"