Table of Contents
Advertisement
Before using the machine for the first
time ensure that it is correctly in-
stalled and connected. See the rele-
vant section under "Installation".
Also check that the fluff filter is se-
curely tightened. Otherwise there is
a risk of water leakage during use.
Any residual lubricants and water from
testing still in the machine should be
flushed out as follows:
^ Turn on the stopcock.
^ Do not load any laundry.
^ Add detergent to compartment j,
however only add max.
amount recommended on the pack-
aging for a full load.
^ Press the I-ON/0-OFF button in.
^ Turn the programme selector to COT-
TONS 60°C.
Important!
This programme must be selected in or-
der to prepare the machine for spinning
and to activate the ball valve.
^ Press the Water plus button in. The
indicator light next to it will come on.
^ Press the "Spin" button repeatedly un-
til the Without final spin indicator light
comes on.
^ Press the START button.
^ When this programme has finished
your washing machine is ready for
using for the first time.
12
1
/
of the
4
Several factors including the water
hardness level in your area will affect
how much detergent you should use.
The small dial in the detergent dis-
penser drawer can be set purely as a
reminder of the hardness level.
^ Remove the yellow spatula from in-
side the dispenser drawer.
^ Adjust the dial to the appropriate set-
ting (1 = soft, 4 = very hard).
Hide quick links:
Advertisement
Table of Contents
