The Wash Programme Stops And A Fault Indicator Light Comes On - Miele W 3834 WPS Operating Instructions Manual

Cleaning and care
The wash programme stops and a fault indicator light comes
on.
Problem
The buzzer sounds and
the Drain check light
flashes. "– – –" appears
in the display.
The buzzer sounds and
the Water inlet check light
flashes. "– – –" appears
in the display.
The buzzer sounds and
the Water inlet and Drain
check lights flash. "– – –"
appears in the display.
The buzzer sounds and
the Pre-wash or the Rinse
hold Sequence indicator
light flashes. "– – –"
appears in the display.
A To switch off the fault message: Switch the washing machine off with I-On/0-Off
button.
36
Possible cause
The water outlet is
blocked or restricted.
The drain hose has
been fixed too high.
The water inlet is
blocked or restricted.
The filter in the water
inlet hose is dirty.
The Miele Waterproof
system has reacted.
There is a fault.
Remedy A
Clean the drain filter and the
drain pump as described in
"Problem solving guide –
Opening the drum door in
the event of a blocked water
outlet and/or a power failure".
The maximum delivery head
is 1 m.
Check whether
– the stopcock has been
opened properly.
– the inlet hose is kinked.
Clean the filter.
Call the Service Department
Start the programme again.
If the fault message appears
again, contact the Service
Department.