Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 3834 WPS Operating Instructions Manual

Honeycomb care
Table of Contents

Advertisement

Spinning

Final spin speed

Programme
Automatic
Cottons
Minimum iron/Delicates
Woollens
Silks
Express
Dark garments
Shirts
Denim
Drain/Spin
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
20

To omit the final spin (Rinse hold)

^ Select the Rinse hold setting. The
rpm
laundry will not be spun and will
1200
remain suspended in the final rinse
1600
water. This reduces creasing if the
1200
laundry is not going to be removed
1200
from the drum immediately after the
400
end of the programme.
1600
– To start the final spin:
1200
600
The Rinse hold indicator light will
illuminate. Select the spin speed you
900
want by pressing the spin speed
1600
button until the indicator light next to
the spin speed you want illuminates.
The washing machine will then start
the final spin.
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin
Select the Without spin setting. The
laundry is not spun after the final rinse.
The water will drain away and the
machine will go straight into the
anti-crease stage. An additional rinse is
introduced if this settnig is selected
with the Automatic , Cottons , Minimum
iron/Delicates and Express
programmes.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents