Table of Contents
Advertisement
Configuring WEP
To configure WEP data encryption:
1. Select WEP/WPA Settings under the Security menu on the left navigation pane. The WEP/
WPA Settings screen will display.
Figure 3-2
2. Check the WEP radio button. The WEP Security Encryption options will display. Select the
Authentication Type from the pull-down menu. The default is Automatic.
3. Selection the Encryption Strength from the pull-down menu; either 64-bit or 128 bit.
4. You can manually or automatically program the four data encryption keys. These values must
be identical on all PCs and wireless access points in your network. Choose either:
•
Automatic – Enter a word or group of printable characters in the Passphrase box and click
the Generate button. The four key boxes will be automatically populated with key values.
•
Manual – Enter the number of hexadecimal digits appropriate to the encryption strength:
10 digits for 64-bit and 26 digits for 128-bit (any combination of 0-9, a-f, or A-F)
Select which of the four keys will be the default.
Wireless Security Settings
RangeMax NEXT Wireless Access Point WN802T Reference Manual
v1.3, August 2006
3-5
Advertisement
Table of Contents
