RangeMax NEXT Wireless Access Point WN802T Reference Manual
•
Delivers stable, application enhancing connections using Steady-Stream technology.
•
Easy, Web-based setup for installation and management.
•
NetBIOS login capability
•
Front panel LEDs for easy monitoring of status and activity.
•
Flash memory for firmware upgrades.
System Requirements
Before installing the WN802T, make sure your system meets these requirements.
•
A 10/100/1000 Mbps Local Area Network device such as a hub, router, or switch.
•
The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it.
•
A 100-240 V, 50-60 HZ AC Switching Power Supply.
•
A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, Netscape
Navigator 4.78 or above or Mozilla Firefox.
•
At least one computer with the TCP/IP protocol installed.
•
802.11Next/b/g or 802.11b/g -compliant devices.
What's in the Box
The product package should contain the following items:
•
RangeMax NEXT Wireless Access Point.
•
12V, 1.5A Switching Power Supply
•
Vertical stand
•
Category 5 (CAT5) Ethernet cable.
•
Resource CD
•
NETGEAR RangeMax™ NEXT Wireless Access Point WN802T Installation Guide
•
Wall mount kit.
•
Warranty and Support Information Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the router for repair.
1-2
.
v1.3, August 2006
Introduction