Technical Specifications; Rangemax Next Default Settings Location; Wall Mount Kit - NETGEAR WN802T-100NAS Reference Manual

Viewed from top to bottom:
1. The reset button which can be used to reset the WN802T or restore the factory default settings.
See Appendix A, "Default Settings and Technical Specifications"
restoring the factory default settings.
2. The Ethernet port for establishing a 10 Mbps, 100 Mbps or 1000 Mbps connection with the
network.
3. AC Universal Power Supply outlet.

RangeMax NEXT Default Settings Location

The label on the rear panel of the wireless access point contains the serial number, MAC address
and default login information for your WN802T device.
Figure 1-3

Wall Mount Kit

A Wall Mount kit that allows you to conveniently and securely mount your WN802T to a wall is
included with your wireless access point. The kit includes a top and bottom bracket. Four screws
are required to install the brackets and are not supplied with the kit. For instructions to install the
the wall mount kit, see
Introduction
RangeMax NEXT Wireless Access Point WN802T Reference Manual
"Installing the Wall Mount Kit (Optional)" on page
v1.3, August 2006
for more information on
2-10.
1-5