Networking Basics; Check Your Ip Address - D-Link DSL-321B User Manual

Appendix B - Networking Basics

Networking Basics

Check Your IP Address

After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless
Modem) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click on the OK.
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the default gateway
of your adapter.
If the address is 0.0.0.0, check your adapter installation, security
settings, and the settings on your Modem. Some firewall software
programs may block a DHCP request on newly installed adapters.
If you are connecting to a wireless network at a hotspot (e.g. hotel,
coffee shop, airport), please contact an employee or administrator to
verify their wireless network settings.
D-Link DSL-321B User Manual 42