Becker Cascade Installation Manual page 21

Installation Guide
Sensors - Sensor function test
Select in the Service menu.
• Move the vehicle several metres forwards or backwards for the
speed signal function test.
The number value behind
speed).
The number value behind
vehicle is in neutral or when the accelerator is pressed while the
vehicle is parked.
• Engage the reverse gear for the reverse signal function test.
The number value behind
( to ).
• Drive round a bend to test the function of the internal sensors.
The value behind
22
must increase (also at low
should not increase when the
must jump from
must change.
8008
to