Load Fail-Safe Defaults - Gigabyte GA-G41M-Combo User Manual

Current Voltage(V) Vcore/DDR/+3.3V/+12V
Displays the current system voltages.
Current CPU Temperature
Displays current CPU temperature.
Current CPU/SYSTEM FAN Speed (RPM)
Displays current CPU/system fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
90 C/194 F.
o o
CPU/SYSTEM FAN Fail Warning
Allows the system to emit warning sound if the CPU/system fan is not connected or fails. Check the fan
condition or fan connection when this occurs. (Default: Disabled)
CPU Smart FAN Control
Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different
speed according to the CPU temperature. You can adjust the fan speed with EasyTune based on system
requirements. If disabled, CPU fan runs at full speed. (Default: Enabled)

2-11 Load Fail-Safe Defaults

MB Intelligent Tweaker(M.I.T.)

Standard CMOS Features

Advanced BIOS Features

Advanced Chipset Features

Integrated Peripherals

Power Management Setup

 PnP/PCI Configurations
ESC: Quit
F8: Q-Flash
Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings.
In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable
BIOS settings for the motherboard.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Load Fail-Safe Defaults (Y/N)? N
 : Select Item
F10: Save & Exit Setup
Load Fail-Safe Defaults
PC Health Status

Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
F11: Save CMOS to BIOS
F12: Load CMOS from BIOS
- 37 -
C/140 F, 70 C/158 F, 80
o o o o
C/176 F,
o o
BIOS Setup