Advanced Bios Features - Gigabyte GA-G41M-Combo User Manual

Floppy 3 Mode Support
Allows you to specify whether the installed floppy disk drive is 3-mode floppy disk drive, a Japanese
standard floppy disk drive. Options are: Disabled (default), Drive A.
Halt On
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard" (default), "All, But Diskette," "All, But Disk/Key."
Memory
These fields are read-only and are determined by the BIOS POST.
2-5

Advanced BIOS Features

 Hard Disk Boot Priority
Quick Boot
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
CPU Multi-Threading
Limit CPUID Max. to 3
No-Execute Memory Protect
CPU Enhanced Halt (C1E)
C2/C2E State Support
CPU Thermal Monitor 2(TM2)
CPU EIST Function
Virtualization Technology
Delay For HDD (Secs)
Backup BIOS Image to HDD
 : Move Enter: Select
F5: Previous Values
Hard Disk Boot Priority
Specifies the sequence of loading the operating system from the installed hard drives.
Quick Boot
Enables or disables the quick boot function to speed up the system boot-up process to shorten the
waiting time for entering the operating system and to deliver greater efficiency for daily use. (Default:
Disabled)
First/Second/Third Boot Device
Specifies the boot order from the available devices.
Password Check
Specifies whether a password is required every time the system boots, or only when you enter BIOS
Setup. After configuring this item, set the password(s) under the Set Supervisor/User Password item in
the BIOS Main Menu.
Setup
System
(Note) This item is present only if you install a CPU that supports this feature. For more information about
Intel CPUs' unique features, please visit Intel's website.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced BIOS Features
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
A password is only required for entering the BIOS Setup program. (Default)
A password is required for booting the system and for entering the BIOS Setup
program.
[Press Enter]
[Disabled]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[0]
[Disabled]
F10: Save
- 29 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup