Table of Contents
Advertisement
3 . 9 .
Load Fail-Safe Defaults
Use this option to reset your BIOS settings to the system defaults. You should only use
this if you are encountering serious problems.
www.DataSheet4U.com
Please select <Y> and <Enter> to load Fail-Safe defaults. Once this is loaded, your
system may be slowed since this uses a minimal performance setting to allow stable
system running.
3 . 1 0 .
Load Optimized Defaults
Like the Fail-Safe mode above, this option loads the BIOS default settings, but runs the
system at optimal performance.
Please select <Y> and <Enter> to load optimized defaults.
3 . 11 .
Set Supervisor/User Password
Use this to set the password that is needed to either enter into the BIOS or to boot the
system. Entering in a blank field will disable the password.
Please input an 8 character long password and then select Enter. You will be required
to re-enter the password for confirmation. If you wish to remove the need for password
e n t r y, leave the entry blank and then select Enter. BIOS will then display "PA S S W O R D
DISABLED". Once you have completed the password setting, you will need to go to
"Advanced BIOS Features" and select "Password Check" for setup of password check.
3 . 1 2 .
Save & Exit Setup
To save any changes you made to the BIOS you must choose this option. The
system will automatically exit setup and perform a system restart. Pushing <F10>
will have the same eff e c t .
Push <Y> and <Enter> to save and exit setup. If you do not wish to save, select <N> or
<Esc> to return to the main menu.
3 . 1 3 .
Exit Without Saving
Use this option instead of the one above if you wish to exit the BIOS without saving the
changes you have made. Pushing <ESC> will have the same eff e c t .
Push <Y> and <Enter> to exit setup. You can return to the main menu by pushing <N>or
<Esc>.
2 6
Advertisement
Table of Contents
