Pnp/Pci Configurations; Pc Health Status - Gigabyte GA-G41M-Combo User Manual

AC Back Function
Determines the state of the system after the return of power from an AC power loss.
Soft-Off
Full-On
Memory
ErP Support
Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default:
Disabled)
Note: When this item is set to Enabled, the following four functions will become unavailable:
PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.
2-9

PnP/PCI Configurations

PCI1 IRQ Assignment
PCI2 IRQ Assignment
 : Move Enter: Select
F5: Previous Values
PCI1/2 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15

2-10 PC Health Status

Reset Case Open Status
Case Opened
Vcore
DDR
+3.3V
+12V
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN Fail Warning
CPU Smart FAN Control
 : Move Enter: Select
F5: Previous Values
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous
chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
BIOS Setup
The system stays off upon the return of the AC power. (Default)
The system is turned on upon the return of the AC power.
The system returns to its last known awake state upon the return of the AC power.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
PnP/PCI Configurations
+/-/PU/PD: Value
F6: Fail-Safe Defaults
BIOS auto-assigns IRQ to the first/second PCI slot. (Default)
Assigns IRQ 3,4,5,7,9,10,11,12,14,15 to the first/second PCI slot.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Auto]
[Auto]
F10: Save
PC Health Status
[Disabled]
No
1.300V
1.584V
3.280V
12.112V
32 C
o
2872 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Enabled]
F10: Save
- 36 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults