Integrated Peripherals - Gigabyte GA-G41M-Combo User Manual

Paranoid PAVP Mode
This item is configurable only if the PAVP Mode option is set to Paranoid PAVP.
Options are: (32+96)128MB (default), (48+96) Round to 160MB, (64+96)160MB, (128+96)224MB and
(256+96)352MB.
The table below shows the supported features of the PAVP Lite and Paranoid modes.
Feature
Compressed video buffer is encrypted
Hardware 128-bit AES decryption
Protected memory
(96 MB reserved during boot)
2-7

Integrated Peripherals

On-Chip Primary PCI IDE
On-Chip SATA Mode
x PATA IDE Set to
SATA Port 0/2 Set to
SATA Port 1/3 Set to
Azalia Codec
Onboard H/W LAN
 SMART LAN
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
USB 1.0 Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
USB Storage Function
 : Move Enter: Select
F5: Previous Values
On-Chip Primary PCI IDE
Enables or disables the first integrated IDE controller. (Default: Enabled)
On-Chip SATA Mode
Configures the integrated SATA controller.
Disabled
Auto
Combined
Enhanced
Non-Combined
BIOS Setup
PAVP Lite
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables the integrated SATA controller.
Lets the BIOS set SATA devices to Combined or Enhanced mode.
If your onboard SATA controller is automatically configured to Combined mode,
you can manually re-configure it to Enhanced mode as needed. (Default)
Sets all SATA devices to operate in PATA mode. Combined allows a
maximum of 4 ATA devices to be used simultaneously: two PATA devices
plus two SATA devices.
Sets all SATA devices to operate in SATA mode.
Sets all SATA devices to operate in PATA mode and disables the integrated
IDE controller.
PAVP Paranoid
Yes Yes
Yes Yes
No Yes
[Enabled]
[Auto]
Ch.0 Master/Slave
Ch.2 Master/Slave
Ch.3 Master/Slave
[Auto]
[Enabled]
[Press Enter]
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[SPP]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
F10: Save
- 32 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults