Shutdown And Startup Problems - Fujitsu LifeBook UH900 User Manual

Problem
The battery seems to 
discharge too quickly.
(continued)

Shutdown and Startup Problems

The Power/Suspend/
Resume button does not
work.
The system powers up,
and displays power on
information, but fails to
load the operating system.
Possible Cause
You are running an applica-
tion that uses a lot of power
due to frequent optical drive
access, or use of a Wireless
LAN, or Bluetooth device.
The brightness is turned all
the way up.
The battery is very old.
The battery has been
exposed to high tempera-
tures.
The battery is too hot or too
cold.
Power/Suspend/Resume 
button is disabled.
There may be application
software. conflict
The boot sequence settings
of the setup utility are not
compatible with your configu-
ration.
You have a secured system
requiring a password to load
your operating system.
72 - Troubleshooting
Possible Solutions
Use a power adapter for this application when at all possible.
Turn down the brightness adjustment. The higher the 
brightness the more power your display uses.
Replace the battery.
Replace the battery.
Restore the notebook to normal operating temperature.
Charging icon on the Status Indicator panel will flash when
battery is outside of operating range.
Enable the button by going to the Control Panel -> System
and Security -> Power Options Properties. Select the
Choose what the power button does option, then make
your selections.
Close all applications and try the button again.
Set the operating source by pressing the [ESC] key while the
Fujitsu logo is on screen or use the [F2] key and enter the
setup utility and adjust the source settings from the Boot
menu. See "BIOS Setup Utility" on page 47.
Make sure you have the right password. Enter the setup util-
ity and verify the Security settings and modify them as
accordingly. See "BIOS Setup Utility" on page 47.