Fujitsu UH-X Quick Start Manual

Hide thumbs Also See for UH-X:

A copy of UH-X User Manual can be downloaded at our website:

https://www.fmworld.net/overseas/hk/support/

(Pictures shown are for illustration purpose only and may look different from the actual unit.)

Unpacking Your UH-X Package

UH-X

1. Plug the DC output cable into the Thunderbolt

2. Plug the AC adapter into and AC electrical outlet.(See Figure above).

When the battery is being charged, the Battery Charging Indicator turns on.

NOTE: The Lithium ion battery is not charged upon purchase. Initial charging time can be up to 3 hours.

We recommend the battery be fully charged before use.

UH-X

Quick Start Guide

AC Adapter

AC Cable

NOTE: When turning on the power for the first time,

Power Button

4 USB4(Gen3) Type-C

the AC adapter must be connected.

B6FK-7641-01EN

of your UH-X.

Continued

Table of Contents

Do you have a question about the UH-X and is the answer not in the manual?

Page 1 UH-X B6FK-7641-01EN Quick Start Guide A copy of UH-X User Manual can be downloaded at our website: https://www.fmworld.net/overseas/hk/support/ (Pictures shown are for illustration purpose only and may look different from the actual unit.) Unpacking Your UH-X Package AC Adapter AC Cable...
Page 2 ●Product serial number ●Hardware configuration ●Purchase date ●Type of device connected, if any ●Conditions under which the problem occurred See the Label on the bottom of your UH-X for Product name and serial number. Copyright FUJITSU CLIENT COMPUTING LIMITED 2022...