Advanced Chipset Setup - ECS 945GSED-I User Manual

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
DRAM Frequency
Configure DRAM Timing by SPD
DVMT Mode Select
DVMT/FIXED Memory
HPET
Boot Display Device
Flat Panel Type
: Move
Enter : Select
F1:General Help
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
DVMT Mode Select (DVMT Mode)
This item allows you to select the DVMT operating mode.
DVMT/FIXED Memory (128MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory, according to system and graphics requirements.
HPET (Enabled)
This item enables or disables HPET (High Performance Event Timer) support.
Boot Display Device (CRT)
This item is to set the system display device during boot up and the value may be
updated according to the setting of OS driver.
Flat Panel Type (Type2)
This item allows you to select the Flat Panel Type. The numbers in the options mean
the maximum resolution which the Panel can support.
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
Auto
Enabled
DVMT Mode
128MB
Enabled
Auto
400 MHz
CRT
533 MHz
Type2
+/-: Value F10: Save and Exit ESC: Exit
F9: Optimized Defaults
Using BIOS
35
Help Item
Options