Removing The Oven Door For Cleaning - Baumatic B602.1BL Instruction Manual

Removing the oven door for cleaning

To facilitate the cleaning of the inside of the oven and the outer frame
of the oven, the door can be removed as follows:-
o The hinges (A) have two movable bolts on them (B).
o If you raise both of the movable bolts (B), then the hinges (A)
are released from the oven housing.
o You should grip the sides of the door at the centre and then
incline it slightly towards the oven cavity and then by pulling it
gently away from the oven cavity.
o IMPORTANT: You should make sure that the door is supported
at all times and that you place the door on some padded
material whilst cleaning it.
o The oven door and door glass should only be cleaned using a
damp cloth and a small amount of detergent. The cloth MUST
NOT have come into contact with any form of cleaning product
or chemical previously.
o To refit the door you should slide the hinges back into their slots
and open the door fully.
o IMPORTANT: The movable bolts (B) must be closed back into
their original positions before closing the door.
o Take care not to dislodge the hinge locking
o Do not immerse the door in water at any
system when removing the door, as the
hinge mechanism has a strong spring.
time.
21