Table of Contents
Advertisement
Gas adjustment (Conversion to LPG and gas adjustment)
IMPORTANT: Your appliance must be disconnected from the
electric and gas supply before completing this process.
Power inputs
Natural Gas
Oven 2.74 kW (injector size 115) 2.74 kW (injector size 80)
Grill
2.4 kW
Gas details
Gas Connection Type:
Gas Type (Natural Gas G20):
Primary air gap (Natural Gas G20):
Gas Type (LPG G30/31):
Primary air gap (LPG G30/31):
(injector size 115) 2.4 kW
o Remove the rear wall assembly
o Replace the injector with one
LPG
(injector size 80)
1/2" BSP male thread
20 mbar
1.0 mm
28/37 mbar
1.0 mm
and the oven burner assembly.
suitable for LPG (see power
inputs information). It is
recommended that the
appropriate thread sealant is
used; always check for gas
tightness after assembly.
o Re-fix the burner
assembly, ensuring that
the injector is within the
cut-out in the rear of the
oven. Adjust the position
of the burner to achieve
the primary air gap.
30
Advertisement
Table of Contents
