Electrical Connection - Baumatic Pythagora P10SS Instruction Manual

Electrical connection

YOUR COOKER HOOD IS INTENDED FOR FITTED AND
PERMANENT INSTALLATION.
o The power cable must be connected to the terminals marked L
(live) and N (neutral) in the hood and fixed with a cable clamp.
o The cooker hood's power cable must be fitted upstream from the
electrical connection, using an omni-polar switch with a contact
distance of at least 3 mm.
WARNING: THIS APPLIANCE MUST BE EARTHED. It
should only be connected by a competent person, using
fixed wiring via a double pole switched fused spur outlet.
(UK ONLY).
We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.E. and local regulations. The wires in the mains lead are
coloured in accordance with the following UK code:
Blue = Neutral, Brown = Live, Green/Yellow = Ground
If you only find two wires in the main's lead (blue and brown),
then neither must be connected to the earth terminal.
o As the colour of the wires in the appliance's mains lead may not
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
o The blue wire must be connected to the
terminal marked "N" (neutral), or coloured
black.
o The brown wire must be connected to the
terminal marked "L" (live), or coloured red.
17