Baumatic Pythagora P30SS Instruction Manual
  1. Manuals
  2. Brands
  3. Baumatic Manuals
  4. Ventilation Hood
  5. Pythagora P30SS
  6. Instruction manual
Baumatic Pythagora P30SS Instruction Manual

Baumatic Pythagora P30SS Instruction Manual

90 cm cooker hood & glass cooker hood
Hide thumbs Also See for Pythagora P30SS:
Table of Contents

Advertisement

Quick Links

Download this manual
P30SS/P31SS
Cooker hood
sti

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pythagora P30SS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Baumatic Pythagora P30SS

Summary of Contents for Baumatic Pythagora P30SS

  • Page 1 P30SS/P31SS Cooker hood...
  • Page 2 User Manual for your Baumatic P30SS Pythagora 90 cm cooker hood P31SS Pythagora 90 cm glass cooker hood NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...

  • Page 3: Table Of Contents

    Contents Page Environmental note IMPORTANT SAFETY INFORMATION 5 – 7 Specifications of your cooker hood Using your Baumatic cooker hood The control panel Controlling your cooker hood The timer button Grease filter maintenance alarm Cleaning your Baumatic cooker hood The grease filter...

  • Page 4: Environmental Note

    This should be undertaken by a competent person. CONFORMITY TO W.E.E.E. DIRECTIVE o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.

  • Page 5: Important Safety Information

    IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Technical Department.
  • Page 6 o The edges of the cooker hood are sharp – be mindful of this as you handle your appliance, especially during installation and cleaning. DO NOT CLEAN IN BEHIND THE GREASE FILTERS! o If the room where the cooker hood is to be used contains a fuel burning appliance such as a central heating boiler then its flue must be of the sealed or balanced flue type.
  • Page 7 o Remember that when in extraction mode, your cooker hood is removing air from the room it is installed in. Ensure that proper ventilation measures are being observed. Note that it removes odours from the room, not steam. o Warning - Always ensure that the cooker hood has been disconnected from the power supply before carrying out any work on the hood, including cleaning and...

  • Page 8: Specifications Of Your Cooker Hood

    Specifications of your cooker hood Congratulations on purchasing a Baumatic Cooker Hood! PRODUCT DIMENSIONS Height (with chimney): 590 mm – 1090 mm Width: 900 mm Depth: 490 mm CHIMNEY DIMENSIONS 260 mm x 263 mm Your cooker hood is fitted with:...

  • Page 9: Using Your Baumatic Cooker Hood

    Using your Baumatic cooker hood The control panel o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o Find the control panel, which is located at the front of the cooker hood.

  • Page 10: Controlling Your Cooker Hood

    Controlling your cooker hood o Use the ON/OFF button to switch the cooker hood on. o Use the plus and minus buttons to regulate the speed that the motor is running at. o The speed level that you have selected will appear on the LCD display.

  • Page 11: Cleaning Your Baumatic Cooker Hood

    Cleaning your Baumatic cooker hood IMPORTANT: BEFORE CLEANING, ALWAYS ENSURE THAT YOU HAVE SWITCHED YOUR COOKER HOOD OFF AT THE OMNI-POLAR SWITCH, SET AT THE WALL FROM THE CABLE. Cleaning o Clean the external parts of your cooker hood with mild liquid detergent and a new damp cloth.

  • Page 12: Maintenance

    Maintenance Removing and cleaning the grease filters o Remove a grease filter by lifting up the catch and then pulling the filter away from the hood. o Soak the grease filters in hot water and washing up liquid for about an hour. o Rinse them off thoroughly with hot water.

  • Page 13: Changing A Light Bulb

    Changing a light bulb IMPORTANT: BEFORE ATTEMPTING TO CHANGE A LIGHT BULB, YOU MUST ENSURE THAT YOU HAVE DISCONNECTED THE COOKER HOOD FROM YOUR MAINS SUPPLY. o Prior to touching the light bulbs ensure they are cooled down. o Find the bulb that requires replacement, you will find it located in the light f ixture which is on the underneath of the...

  • Page 14: Fitting The Carbon Filter

    Fitting the carbon filter If the appliance is going to be used in recirculation mode then it is necessary to fit a carbon filter. This will help to absorb unpleasant odours caused by cooking. IMPORTANT: BEFORE ATTEMPTING TO FIT OR REMOVE THE CARBON FILTER, YOU MUST ENSURE THAT YOU HAVE DISCONNECTED THE COOKER HOOD FROM YOUR MAINS SUPPLY.

  • Page 15: Installation

    Installation IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found behind the grease filters.

  • Page 16: Electrical Connection

    Electrical connection YOUR COOKER HOOD IS INTENDED FOR FITTED AND PERMANENT INSTALLATION. o The power cable must be connected to the terminals marked L (live) and N (neutral) in the hood and fixed with a cable clamp. o The cooker hood’s power cable must be fitted upstream from the electrical connection, using an omni-polar switch with a contact distance of at least 3 mm.

  • Page 17: Before Beginning Installation

    Before beginning installation o Check that the product purchased is of a suitable size for the chosen installation area. In addition check whether there is an electrical socket available that will be accessible once the hood is mounted. If the product is going to be used in extraction mode, then there should also be space to connect a ducting hose to the outside.

  • Page 18: Extraction Mode Or Recirculation Mode

    Extraction mode or recirculation mode? IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE INSTALLING YOUR COOKER HOOD WHETHER TO USE IT IN EXTRACTION MODE OR RECIRCULATION MODE. What is the difference between extraction and recirculation modes? In extraction mode, the stale air will be taken out of the room via external ducting.

  • Page 19: Installing Your Cooker Hood

    Installing your cooker hood o We recommend that at least two people install this hood. IMPORTANT: YOUR COOKER HOOD SHOULD BE CONNECTED TO YOUR MAINS SUPPLY AFTER THE REST OF THE INSTALLATION PROCESS HAS BEEN COMPLETED. 1) Remove the metal grease filters.
  • Page 20 4) Using a pencil, mark the centre of the wall where the cooker hood will be installed. Place the mounting bar against the wall and ensure that the middle of it is placed on the centre mark. o Use a pencil to mark the position of where the screw holes will be drilled.
  • Page 21 7) Hook the hood onto the mounting bar. 8) If required you can adjust the alignment of the cooker hood using the screws on the brackets that hook over the mounting bar. o The top screw (B) adjusts the distance from the wall and the bottom screw (C) adjusts the height.
  • Page 22 9) Mark the position of the lower screw holes that need to be drilled out in step 10. The holes can be found immediately below the motor housing. (The position of one of the holes is indicated in the above photograph by the screwdriver).

  • Page 23: Connecting To External Ducting

    150 cm². o The maximum distance between the coupling and your discharge outlet should be 3 metres, with one 90 degree bend. * It is possible to purchase a ducting kit from the Baumatic Spares Department (either the DK5 or DK10).

  • Page 24: Fitting The Chimney Section

    Fitting the chimney 13) Separate the two chimney sections (G and H). o Rest the bottom of chimney section G on the top of the hood. Making sure that the holes at the bottom of it, line up with the securing holes on top of the motor housing.
  • Page 25 16) Using a 4 mm drill bit, drill out holes on the pencil markings that you made in step 15. Insert rawl plugs into the holes and then use a screwdriver to secure the fixing bracket to the wall. 17) Place chimney section G back onto the hood. o Make sure that the holes in the bottom of chimney section G line up with the securing holes on top of the main body of the motor housing.

  • Page 26: Completing The Installation

    o IMPORTANT: Make sure that the vent on either side of chimney section H is pointing upwards and not inside of chimney section 18) Lift chimney section H up to the fixing bracket that you secured to the wall in step 16. Secure it to the fixing bracket using the screws provided.

  • Page 27: Troubleshooting

    Troubleshooting IMPORTANT: If your cooker hood appears not to be operating properly, before contacting the Baumatic Service Department, please refer to the checklist below. My cooker hood will not start. o Check that the hood is connected to the power supply and whether you have selected any of the fan speeds.

  • Page 28: Baumatic Ltd. Conditions Of Guarantee

    Baumatic appliance. * In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of charge the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any defect that arises due to faulty materials or workmanship within a period of 5 years from the original purchase date.
  • Page 29 Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone...
  • Page 32 32 32...

This manual is also suitable for:

Pythagora p31ss

Table of Contents