Setting A Wash Program - Baumatic BDF440SL Instruction Manual

Setting a wash program

Make sure that the "Before first use" section has been
followed.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Close the door firmly, so that you hear the door lock click shut.
o Switch the appliance on by using the ON/OFF button, the power
on indicator will light.
o IMPORTANT: Wait for 5 seconds before pressing a
program selection button, otherwise the appliance may
not function correctly.
o Press the relevant program selection button to choose an
appropriate wash program for the load that you are washing.
The light on the program selection button that you have pressed
will switch on.
o Select any program option that you want to use (e.g. delay
start).
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
o If you open the door whilst the machine is on a wash cycle, then
you should open the door slightly.
o The spray arms will stop turning after a few seconds. You can
then open the door fully.
o When you close the dishwasher door, after approximately 10
seconds the wash program will continue.
22