Wheel Kit Installation - Honda EG4000CL Owner's Manual

WHEEL KIT INSTALLATION

1. Install the two wheels on the axle shaft using the plain washers and
split pins.
2. Install the axle assembly on the generator using four 8
flange bolts and 8 mm flange nuts.
3. Install the two stands on the under frame using four 8
flange bolts.
TORQUE: 17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
8 16 mm FLANGE BOLT (8)
WHEEL (2)
STAND (2)
OPTIONAL PARTS
LONGER
UNDER FLAME
AXLE SHAFT
8 mm FLANGE NUT (4)
16 mm
16 mm
GENERATOR
SIDE
20 mm
PLAIN WASHER (2)
4 28 mm
SPLIT PIN (2)
71