WHEEL KIT INSTALLATION
1. Install the two wheels on the axle shaft using the plain washers and
split pins.
2. Install the axle assembly on the generator using four 8×16 mm
flange bolts and 8 mm flange nuts.
3. Install the two stands on the under frame using four 8×16 mm
flange bolts.
TORQUE: 17–22 lbf·ft (24–29 N·m, 2.4–3.0 kgf·m)
8×16 mm FLANGE BOLT (8)
WHEEL (2)
STAND (2)
OPTIONAL PARTS
LONGER
UNDER FLAME
AXLE SHAFT
8 mm FLANGE NUT (4)
GENERATOR
SIDE
20 mm
PLAIN WASHER (2)
4×28 mm
SPLIT PIN (2)
75