Setting The Bobbin - Baby Lock ellegante BLG Instruction And Reference Manual

LOWER THREADING
$
Push the spool cap onto the spool pin as far
as possible, then return the spool pin to its
original position.
%
Holding the thread with your hands, slide
the thread into the grooves on the thread
guide plate.
Thread guide plate
&
Pass the thread through the thread guide.
Thread guide
'
Pass the thread under the pin. Then pass the
thread around the pretension disk making
sure that the thread is under the pretension
disk.
Thread guide
Pin
Pretension disk
(
'
Follow steps through
through 23.
Press
the operation on the LCD (see page 20). Follow
the steps explained below to complete the
operation.
!
"
#
$
*
on page 22

Setting the Bobbin

!
in that order to display a video example of
CAUTION
• Use a bobbin thread that has been correctly
wound. Otherwise, the needle may break or
the thread tension will be incorrect.
Press the "Presser Foot Lifter" button to
raise the presser foot.
Slide the bobbin cover latch to the right.
Bobbin cover
Latch
! The bobbin cover opens.
Remove the bobbin cover.
Hold the bobbin with your right hand and
hold the end of the thread with your left
hand.
! !