Lower Threading; Winding The Bobbin; Using The Supplemental Spool Pin - Baby Lock ellegante BLG Instruction And Reference Manual

LOWER THREADING

Winding the Bobbin

!
Press
in that order to display a video example of
bobbin winding on the LCD (see page 20). Follow
the steps explained below to complete the
operation.
CAUTION
• The enclosed bobbin was designed specifically
for this sewing machine. If bobbins from other
models are used, the machine will not operate
correctly. Use only the enclosed bobbin or
bobbins of the same type (part code: X52800-
150).
11.5 mm
(approx.
7/16 inch)
This model

■ Using the Supplemental Spool Pin

With this machine, you can wind the bobbin during
sewing. While using the main spool pin to sew
embroidery, you can conveniently wind the bobbin
using the supplemental spool pin.
5
6
Supplemental spool pin
! !
Actual size
Other models
3, 4
2
9
7, 8
l
1
!
Turn the main power to ON.
"
Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.
Groove of the bobbin
Spring on the shaft
#
Set the supplemental spool pin in the "up"
position.
Supplemental spool pin
$
Place the spool of thread on the
supplemental spool pin, so that thread
unrolls from the front. Then push the spool
cap onto the spool pin as far as possible to
secure the thread spool.
Spool pin
Spool cap
Thread spool

LOWER THREADING