Flat Fell Seam - Baby Lock ellegante BLG Instruction And Reference Manual

SEWING THE STITCHES
$
Sew two rows of straight stitches parallel to
the seam line, then trim excess thread
leaving 50 mm (approx. 1-15/16 inches).
Seam line
10 to 15 mm (approx. 3/8 inch to 9/16 inch)
About 50 mm (approx. 1-15/16 inches)
%
Pull the bobbin threads to obtain the
desired amount of gather, then tie the
threads.
&
Smooth the gathers by ironing them.
'
Sew on the seam line and remove the
basting stitch.

Flat Fell Seam

Use for reinforcing seams and finishing edges
neatly.
!
Select and attach presser foot "J".
"
With right sides of the fabric together, sew
the seam line, then cut half of the seam
allowance from the side on which the flat
fell seam will lie.
* When the automatic thread cutting and automatic
reinforcement stitching are preset, reinforcement
stitches will be sewn automatically at the beginning
of sewing. Press the "Reverse/Reinforcement Stitch"
button to sew a reinforcement stitch and trim the
thread automatically at the end of sewing.
About 12 mm (approx. 1/2 inch)
Wrong side
#
Spread the fabric out along the seam line.
Seam line
Wrong side
$
Lay both seam allowances on the side of the
shorter seam (cut seam) and iron them.
Wrong side