Automatic Thread Cutting - Baby Lock ellegante BLG Instruction And Reference Manual

Automatic Thread Cutting

After selecting a stitch pattern, turn on the
automatic thread cutting function before sewing,
and the machine will automatically sew
reinforcement stitches (or reverse stitches,
depending on the stitch pattern) at the beginning
and end of sewing, and trim the threads at the end
of sewing. This function is useful when sewing
buttonholes and bar tacks.
!
Select a stitch pattern.
"
Press to set the automatic thread
cutting function.
! The key will display as
Memo
This function is set automatically when sewing
embroidery.
#
$
.
Set the fabric in the start position and start
sewing.
Reverse stitches (or reinforcement stitches)
! The machine will automatically sew reverse stitches
(or reinforcement stitches) and then continue
sewing.
Memo
If you press the "Start/Stop" button to pause
sewing, press the same button again to con-
tinue. The beginning reverse/reinforcement
stitches will not be sewn again.
Press the "Reverse/Reinforcement
Stitching" button.
Reverse stitches (or reinforcement stitches)
! The machine will sew reverse stitches (or
reinforcement stitches), then trim the thread.
Memo
To turn off the automatic thread cutting func-
tion, press again, so it appears as
USEFUL FUNCTIONS
.