Removing The Embroidery Unit - Baby Lock ellegante BLG Instruction And Reference Manual

$
Turn the main power to ON.
! The following message will appear.
%
Press .
! The carriage will move to the initialization position.
Note
• A confirmation message to lower the frame-
securing lever after the carriage moves to its
initial position.
The message will disappear after 15 seconds or press
to move to the next step.

■ Removing the Embroidery Unit

!
Press either
.
! The carriage will move to the removal position.
or , then press
CAUTION
• Always remove the embroidery frame before
pressing . Otherwise, the frame may
strike the embroidery foot, and possibly cause
injury.
• The embroidery unit will not fit in the storage
case if this step is not done.
"
Turn the main power to OFF.
Note
• Be sure to turn the main power to OFF.
Otherwise, the machine may be damaged.
#
Hold down the release button, and pull the
embroidery unit away from the machine.
Release button
CAUTION
Do not carry the embroidery unit by holding the
release button compartment.
BEFORE EMBROIDERING