Baby Lock Crafter's Choice BLCC2 Instruction And Reference Manual page 77

0 Close the zipper, turn over the fabric, and then
baste the other side of the zipper to the fabric.
1 Basting stitching
a Attach the presser foot holder to the other pin
of zipper foot "I".
If the presser foot holder was attached to the
6
right pin in step , change it to the left pin.
2
1 Pin on the left side
2 Needle drop point
b Topstitch around the zipper.
Sew reverse stitches at the end of the zipper
opening and align the zipper teeth with the
side of the presser foot.
2
1
1 Right side of fabric
2 End of zipper opening
3 Reverse stitches
4 Beginning of stitching
5 Basting stitching
CAUTION
●
When sewing, be sure that the needle
does not touch the zipper, otherwise the
needle may bend or break.
1
1
I
3
4
5
c When you are about 5 cm (2 inches) from the
end of the zipper, stop the sewing machine
with the needle lowered (in the fabric), raise
the presser foot lever, and then open the
zipper and continue sewing.
d Remove the basting stitching.
Zipper Insertion 75
3